R4T Tacoma Double Cab Long Bed Build

December 11, 2024 we decided to go bigger on tire size because of the way it looked with the +1" carbon fiber fender flares. We wanted more poke from the wheel/tire combo so we installed the brand new RRW RG4-H in a 17x8.5 0 offset. The old set was 17x8 +12 offset. We then installed 37x12.5x17 Toyo MTs with bead lock rings.

We needed a little more lift from the Peak Suspension spacer lift kit so we swapped it out for 2024 Tacoma King Shocks kit. We set the front at 2" and used rear coil springs from a 2022 Tundra for the rear lift.

We took all the crash brackets off inside the wheel well that would cause rubbing issues. We trimmed the liner high up as needed. We also had to cut the NYTOP carbon fiber fender flares to allow full articulation and suspension travel.

We also installed the RCI skid package for the 2024 Tacoma which includes the engine, transmission, and T-case skid.

RCI - Skid Plate Package - Toyota Tacoma (2024+)https://runnin4tacos.com/products/rci-skid-plate-package-toyota-tacoma-2024

After we trimmed everything necessary, we went to Sand Hallow to make sure we had the proper clearance.

Read the original here:
R4T Tacoma Double Cab Long Bed Build